Ashland APBS, Руководство по эксплуатации

Страница: 8 / 32

8
Battery Backup
Model: APBS
Testing & Operation
Retain Original Purchase Receipt for Warranty Eligibility
Limited Warranty
Manufacturer warrants to the original consumer purchaser (“Purchaser” or “You”) that its products are free from defects
in material and workmanship for a period of twenty-four (24) months from the date of the original consumer purchase. If,
within twenty-four (24) months from the original consumer purchase, any such product shall prove to be defective, it shall
be repaired or replaced at manufacturer’s option, subject to the terms and conditions set forth herein. Note that this limited
warranty applies to manufacturing defects only and not to ordinary wear and tear. All mechanical devices need periodic
parts and service to perform well. This limited warranty does not cover repair when normal use has exhausted the life of a
part or the equipment.
The original purchase receipt and product warranty information label are required to determine warranty eligibility. Eligibil-
ity is based on purchase date or original product – not the date of replacement under warranty. The warranty is limited to
repair or replacement of original purchased product only, not replacement product (i.e. one warranty replacement allowed
per purchase).
Purchaser pays all removal, installation, labor, shipping, and incidental charges.
Claims made under this warranty shall be made by returning the product to the retail outlet where it was purchased or to
the factory immediately after the discovery or any alleged defect. Manufacturer will subsequently take corrective action as
promptly as reasonably possible. No requests for service will be accepted if received more than 30 days after the warranty
expires. Warranty is not transferable and does not apply to products used in commercial/rental applications.
General Terms and Conditions; Limitations of Remedies
You must pay all labor and shipping charges necessary to replace product covered by this warranty. This warranty does
not apply to the following: (1) acts of God; (2) products which, in manufacturer’s sole judgment, have been subject to
negligence, abuse, accident, misapplication, tampering, or alteration; (3) failures due to improper installation, operation,
maintenance or storage; (4) atypical or unapproved application, use or service; (5) failures caused by corrosion, rust or
other foreign materials in the system, or operation at pressures in excess of recommended maximums.
This warranty sets forth manufacturer’s sole obligation and purchaser’s exclusive remedy for defective products.
MANUFACTURER SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, OR CONTINGENT DAMAGES
WHATSOEVER. THE FOREGOING LIMITED WARRANTIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS
AND IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE. THE FOREGOING LIMITED WARRANTIES SHALL NOT EXTEND
BEYOND THE DURATION PROVIDED HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an
implied warranty lasts, so the above limitations or exclusions may not apply to You. This warranty gives You specific legal
rights and You may also have other rights which vary from state to state.
Warranty is Void if....
1. Using an extension cord.
2. Any power cord has been cut or the grounding prongs removed or using an adapter fitting.
3. Inverter has been used in an outdoor application.
4. Batteries not meeting the above specifications have been used.
5. Inverter has been submerged in water.
6. Inverter has been tampered with in any manor not described in the above instructions.
7. Working on the inverter, pump or switch while plugged in.
8. Inverter has been disassembled by customer.
9. Inverter has been applied to products exceeding the maximum capacity of the inverter, i.e., a pump other than the one
supplied with the unit or more than one pump.
10. Inverter has been applied to the wrong voltage.
11. Removing motor housing, unscrewing impeller, or otherwise removing impeller seal of pump.
12. Running the pump continuously.
13. Pumping chemicals or corrosive liquids.
14. Pumping gasoline or other flammable liquids.
15. Any tags or labels have been removed from the inverter, pump or ion Digital Control Switch.