2
Hardware List
4
4
38mm (1 ½”)
Rubber feet
12mm (½”)
8
4
4
Before commencing, please read these instructions
completely, identify the parts and note the
assembly sequence.
Finish
Your Yarn Stand 6 has been factory lacquered.
If desired Ashford Wax Finish may be applied to
further enhance its appearance.
ASSEMBLY INSTRUCTIONS FOR
THE ASHFORD YARN STAND 6
Check hardware against full
size illustration.
Rub candle wax onto the screw
threads to make assembly
easier.
Hints
Tools Required
Attach the 4 rubber feet
to the underside of the
base with 12mm (½”)
screws. This may be
easier if the corner of
the base is sitting on the
edge of a table or bench.
(small hammer)
With the base on a firm
surface (not carpet),
gently
tap the 6 wooden
dowels into the base.
Carpet
Firm surface