2
To make assembly easier use
candle wax on the screws.
350
mm (13 ¾
”
)
15mm (
⁵/₈”
)
15mm (
⁵/₈”
)
65
mm (2 ½
”)
Ø
6mm (
¼”
)
Front
Back
Before commencing, please read these instructions
completely, identify the parts and note the
assembly sequence.
Remove any sharp corners or edges and smooth
the surface of the wood with the sand paper
provided. We recommend that the wood surfaces
be waxed or sealed before assembly. This protects
the kiln dried wood from the climatic changes
and prevents it getting dirty or stained. The Silver
Beech tree is a native of New Zealand and has
a lovely variety of colour and grain. For a silky
smooth matt finish, use the Ashford Finishing Wax
to enhance the natural colours and character of
this timber.
If you are assembling on a table, we recommend
you protect the surface with a towel, blanket or
cardboard.
For older models:
If your Rigid Heddle Loom does
not have holes in the sides, mark the holes as
shown and drill them with a 6mm (
¼”
) bit.
ASSEMBLY INSTRUCTIONS FOR
THE ASHFORD RIGID HEDDLE LOOM STAND
Tools Required
More Information
The Wheel Magazine
Ashford’s annual fibrecraft
magazine. Spinning, weaving,
felting, dyeing and knitting
projects, patterns and articles
from around the world. To
receive the premium version
delivered to you, subscribe at:
www.ashford.co.nz/subscribe
How-to videos on You Tube
Watch our how-to videos on You Tube.
www.youtube.com/user/AshfordHandicrafts
Join us on facebook.
www.facebook.com/ashford.wheels.looms
45mm (1¾") screws
32mm (1¼") screws
40mm (1½") bolts
Hardware List
x
6
x
6
x
2
x
8
x
8
x
4
Pins
Washers
Knobs
