2
1.
Attach the 2 feet to the base rail
with washers and knobs.
2.
Insert the 2 x
⅜
”stainless steel
rods into the holes in the base.
Note the base rail will tilt approx.
30 degrees.
3.
Apply a drop
of oil to the 2 x
stainless steel rods
before placing the
bobbins on.
4.
For transport or storage, remove
the 2 x stainless steel rods, loosen
the 2 knobs until the rods can be
inserted into the holes in the feet.
Then retighten the knobs to lock
the rods in place.
The Lazy Kate Super Jumbo may
be stored in the carry bag with the
e-Spinner Super Jumbo.
Steel Shaft
Before commencing, please read these instructions completely, identify the parts and note the assembly
sequence.
Finish
Your Lazy Kate Super Jumbo has been lacquered prior to assembly. If desired Ashford Finishing Wax Polish
may be applied to further enhance its appearance.
Assembly Instructions for the Lazy Kate Super Jumbo
Tighten
