4
x
2
x
2
x
2
Front
Back
x
4
Squeeze
Thread the flyer hooks
into the flyer arms.
Squeeze and slide the
stainless steel yarn guides
onto the flyer arms.
Attach the front flyer bearing
with the large slot to the top
front rail with 19mm (3/4”)
screws.
CHECK:
The front top rail has
provision for the flyer brake.
Attach the back flyer bearing
with the small slot to the top
back rail with 19mm (3/4”)
screws.
Assemble the bobbin by aligning the screw holes in the bobbin end, whorl and long end of the bobbin
centre. Then push the bobbin end and whorl onto the bobbin centre keeping the holes aligned and
secure with 50mm (2") round head screws. Align the screw holes in the other bobbin end and short end
of the bobbin centre. Push the bobbin end onto the bobbin centre keeping the holes aligned and secure
with 25mm (1") round head screws.
