Ashdown AGM Series, Руководство пользователя

Страница: 21 / 24

2) LEADS AND PLUGS
Your amplifier contains possibly lethal voltages and must therefore be connected to the mains
using the correct power cord, which is a three terminal type with a ground connection.
The power cord supplied with the unit should be of the correct type. If it does not fit your mains
outlet consult your dealer or a qualified electrician for advice before attempting to use the ampli-
fier. Never modify the power cord or attempt to use it with a two pin outlet. Store all your leads
in a dry case and take care when packing them away. All leads, including guitar leads, are easily
damaged with careless handling, so it is a good idea to carry a spare lead of every type you use.
Flexible power cords get damaged very easily. At the first sign of damage, discard it and purchase
a new one. Always replace the power cord with one of the same type. Moulded cords are the
best choice with both plugs permanently fitted to the cord. When using your amplifier and other
equipment it is a good idea to connect to the supply using a unit known as an R.C.D. These units
are not expensive and offer the user additional protection against electric shock. An electrical
shop should be able to supply you with a suitable unit.
3) BEFORE USE
Inspect your amplifier for damage before use. Check each lead for damage before you plug them
in to the amplifier, and ensure that the loudspeaker is connected before you switch the amplifier
on. Never try to operate the amplifier without the speaker connected. If you do, serious damage
to the amplifier will result which will be very expensive to repair. Double check the connections
you have made to your amplifier and make sure you have connected the speaker to the correct
outlet socket that matches the cabinet you are using. The impedance of the speaker is important
and is usually shown on a plate affixed to the back of the cabinet, so if the cabinet is 16R (Ohms)
then you plug into the 16R outlet on the amplifier.
4) USING THE AMPLIFIER
When you set the amplifier up for use, it is important that you adhere to the following rules:
Place the amplifier away from sources of heat, including radiators, etc. The amplifier itself will get
hot in normal use. Make sure that all the grilles on the amplifier are not obstructed in any way so
that cooling air can circulate through the amplifier. Do not place anything on or behind the ampli-
fier that might restrict the flow of air. This includes items of clothing, or other equipment.
Do not place the amplifier in such a position where it may get splashed with liquid or water, e.g.
near tables of drinks or near equipment that contains water, e.g. smoke and bubble machines.
Never stand bottles or containers of liquid on the amplifier. If any liquid is accidentally spilled into
the amplifier, unplug it from the mains supply immediately and take the amplifier to a qualified
technician for inspection. Do not place objects on the amplifier that could fall inside and cause a
malfunction, e.g. coins, tools, etc.