ASG, Division of Jergens, Inc.
15700
S. Waterloo Road | Cleveland, OH 44110-3898
Phone: (888) 486-6163 | Fax: (216) 481-4519
Email: [email protected] | Web: www.asg-jergens.com
Page 1 of 3
PS-55AT
User Manual
• Please read this operation manual before using the power supply for correct and safe use
• The power supply shall be used with correct input of voltage
• The power supply shall be used in a place of good ventilation
• Please put the power supply in a clean and dry place, which is far away from oil, gas, noise and high voltage site
• Please make sure the power supply is grounded in use
• Please return to ASG for any repairs
• The power supply shall be put at a place where it is clearly seen, easy to move and convenient for maintenance
Note
Product Specifications
Front Panel
© 2017 Jergens, Inc. All Rights Reserved | Revision Date: 2/23/2017
Power Switch
HI/LOW:
rotary speed voltage
switch, may change output voltage
of the electric driver by 30V/20V
Electric Driver Power Cord Socket:
please use cord supplied with the
screwdriver
Signal State Indicator Light:
• Start light on while start
signal is applied
• Stop light on while stop
signal is applied
• Finish light on when
clutch has activated
ASG Number
65707
Model Number
PS-55AT
Size
7 x 3.5 x 3.3 in. (180 x 90 x 85 mm)
Weight
6 lb. (2700 g)
Input Voltage
AC 110V or 230V 50/60Hz
AC Plug Cord Length
6 ft. (1.8 m)
Output Voltage
DC 30/20V HI/LOW Max 2.5A
