3
1.
Remove the ALU-40TC Lamp Assembly
and accessory pouch from the carrying
case. Remove the Table Clamp from the
pouch and turn the adjustment knob on
the bottom counterclockwise to open its
jaws (max. opening: 1.5 in. / 3.81 cm).
Slip the open Clamp over the edge of a
table or other support structure with the
Lamp mounting stud pointing upward.
Secure the Clamp to the table/structure
by tightening the adjustment knob
clockwise against the bottom side of the
table/structure. Hand tighten only.
IMPORTANT:
The table or support
structure must be strong enough to safely
support the Lamp Assembly.
Slide the Lamp’s vertical post downward
overtop the mounting stud on the Clamp
until the post seats firmly against the
flange on the stud.
2.
Loosen the boom adjustment handle and
extend boom to desired length and/or
pivot the lamp head to the desired
operating position. Tighten handle to
secure the boom in place.
SETTING UP THE UNIT:
Fig. 1 - System Components
POWER
SUPPLY
VERTICAL POST
FLEXIBLE GOOSENECK
LAMP HEAD
w/ADJUSTABLE
CONTROLS
BOOM
ADJUSTMENT
HANDLE
LAMP
BOOM
AC POWER
CONNECTOR
ON/OFF
SWITCH
DC POWER
CONNECTOR
FUSE
COMPARTMENT
Fig. 2 - Power Supply - Bottom View
TABLE
CLAMP
Adjustable, up to 1.5"
(3.81 cm) Max. Open