Fire Telephone Panel User Manual
3
/
6
1. LED power indicator 2. Extension 3. Extension 4. Microphone button
5. The microphone jack 6. Digital recording area 7. Power switch 8. Automatic FIRE key
4
Installation instructions
4.1
Installation: the machine is removed from the box, first check the appearance of
the machine from ministries.
4.2
Points is good, good confirmation is correct, the machine will be installed in the
proper position, the cable is installed on the terminal block corresponding to the
terminal assembly inside the machine.
4.3
The power required by the machine work on the standard polarity to (power input
terminals are also installed inside the machine) terminals. Note To put the "off"
position (on the pass, the next break) Connect the power cord at the power
switch.
4.4
Confirmed that the wiring is correct after the power switch is correct, then, the
"Power" on the control panel.
4.5
LED is lit, the machine is working properly.
4.6
Panel calls to a particular extension, press the corresponding extension button,
then the corresponding red light flashes, the Panel to the extension rings,
extension rings, the Panel of the handset should hear ring back tone, the
extension goes off-hook indication light Always, the two sides can talk. After the
Panel calls the extension, if the extension goes off-hook before the extension
then click this button to stop ringing this extension, the corresponding LED is off,
stop calling this extension.
4.7
Automatic call recording: once for each call to a call from a digital recorder
moving
4.8
Recordings. Call ends, stop recording automatically.
4.9
Panel a multi-part call: Press the key multiple extensions, call multi-part
constitutes the Panel machine. These extensions status indicator flashes, the
Panel of the extension ring. For a station answering machine, and the Panel can
call the extension, the rest of the machine did not give the extension continue to
ring. If a longer extension should not call, then click the extension button to end
the call this extension. Panel and multiple extension call, press the key one or
more extensions, these extensions may be forced to exit a call, to exit the
extension can hear the busy tone. If a station has not hook this time and press
the extension button again to resume the conversation with this extension. Panel
a call at any time during a call to another extension.
4.10 Extension Call Panel: For extension machine can hear the ringback tone, then
the Panel sends alarm Panel panel extension corresponding indicator light
flashes, press the button to call this extension, the extension indicator light. In
this case the absence of other extensions lift machine, sound and light alarm
