Aseko ASIN Aqua SALT, Руководство пользователя

Страница: 17 / 18

Electrode life
The TE27 electrodes, which are a substantial part of the electrolyser, are made of titanium coated with a
special layer of ruthenium and iridium, which are used up during operation. To minimize their
consumption, you must beware of
• low salt content (under 4kg/m 3 )
• water temperature under 10°C
• low water flow
• water is too hard
•
pH values under 7,5
•
use of additives containing metals
Electrode cleaning
During operation, the electrodes are gradually covered by sediments from hard water, which must be
periodically removed. Electrode coverage by sediments leads to a lower output of the electrolyser, we can
recognize this by the decreasing output (as shown on the ASIN Aqua SALT display) while the salt content
remains the same. In this case we must turn off the system, take the electrodes out and soak them in the
electrode cleaning tank, filled with electrode cleaning solution, for approx. 10 minutes. The whitish
coating on the electrodes should disappear and the electrodes can be put back into the electrolyser.
Warranty
The manufacturer provides a two year warranty for ASIN Aqua SALT units as of the date of sale. If this date
cannot be credibly documented, the warranty runs from the date of manufacture on the manufacturer's
label.
The manufacturer is not liable for defects caused by use of the ASIN Aqua SALT in disregard of the manual.
The manufacturer is further not liable for damages caused by inexpert installation of the unit. Before you
call a service technician to claim the warranty, check the following points, which are under your liability:
1. electric supply is functional
2. the unit is mounted in compliance with the manual
3. the water meets the required pH and salt content parameters
4. the electrode is clean
5. there is sufficient water flow through the electrode
6. the apparatus fuse is all right.
17