ASE 2000, Руководство пользователя

Страница: 16 / 26

All Seasons Equipment |Owner’s Manual - 2000 Hydraulic Swing Hoist 16
Hoist Pulleys
The grease fittings in the pulley bolts should be greased daily. When this
greasing is being done, the operator should also inspect the pulleys for wear. A
typical sign of dangerous wear is a flat spot being worn into one edge of the
pulley, this indicates that the pulley had stopped rotating and the cable has run
over the surface.
During a lift, the cable is under a large amount of stress and is extremely tight.
By running over a pulley without it rotating it can easily cut the pulley in half.
The operator should keep an eye on the pulleys while operating the hoist. If a
pulley ceases to rotate, the unit should be stopped immediately and the pulley
should then be inspected.