OPERATING INSTRUCTIONS
3
WARNING!
Ensure that you read, understand and apply the safety instructions and warnings before use.
WARNING!
Ensure that you have familiarized yourself thoroughly with the product and the hazards
associated with its improper use.
1. Before first use of this product, pour a teaspoon of good quality air tool lubricant into the hose quick
coupler-male of the air quick coupler-female, then connect it to air source and turn on the air valve
and work for 3 seconds to evenly distribute lubricant.
2. Use the slotted end of the handle to turn the release valve clockwise until it is firmly closed.
3. Apply the emergency brake and use wheel chocks to block all wheels to prevent any movement of the
vehicle being lifted.
4. Place the jack into position and adjust the extension screw on part as needed.
NOTE
: Check in your vehicle owner’s manual for the location of recommended lift point.
5. Connect the air quick coupler-male into the shop air supply hose quick coupler-female, then turn on
the air valve.
6. Raise the load to desired height, turn off the air valve and immediately USE JACK STAND PAIR with
adequate capacity to support the load.
7. When air source is not available, insert the big end of the handle into the handle bracket, pump it
manually to raise the load to desired height. Then immediately transfer the load to appropriate support
devices such as jack stands.
WARNING!
Be sure all tools and personnel are clear before lowering load.
8. When work is done, raise load enough to carefully remove the jack stands. Then SLOWLY and CAREFULLY
lower the load by turning the release valve counterclockwise (use the slotted end of the handle) in
extremely small increments, then lower the extension screw by turning it clockwise as needed and
remove the jack.
WARNING!
Dangerous dynamic shock loads are created by quick opening and closing the release
valve when the load is being lowered. The resulting overload may cause hydraulic system failure
which could cause severe personal injury and/or property damage.
