Ascon tecnologic DY-5121, Руководство пользователя

Страница: 43 / 50

Chapter 5 - Module Setup
37
Select an update file - This is used to update firmware, files with extension nbu,
or install patch, files with extension nbp, for the Protocol coverter.
Make sure to make a backup before starting to update the firmware, see section
Error! Reference ource not found. on page 21.

WARNING
Latest firmware can be found at http://support .intellicom.se. When clicking
update the NetBiter® WS100 will start updating. Sometimes the web browser will
not be able to display web pages. Just wait for some minutes and try to view the
page again. The communication configuration for Ethernet, modem and Net-
Biter.net will not be affected which makes it possible to update firmware remotely.
MAC address - MAC address of the Protocol converter Ethernet interface.
Kernel version - Kernel version used in the istrument.
Application version - Application version of the instrument.
Patches - If there are patches installed in the system they will be displayed here
with version and inforamtion about the patch.
Note: The latest firmware and kernel version can be found at http://support.intellicom.se.
There is a link to this page at the bottom of the user interface.
5-9-3 Tools
Get all log files - Put all log files and system information in a tar-archive.
Restart module - By clicking the reboot button the module will restart.
Reset To Factory Default Setting - By clicking this button the Protocol converter
will remove all settings and configurations and has to be setup and configured as
a brand new system.