ASCOM LACERTA MOTORFOCUS, Руководство пользователя

Страница: 16 / 21

LACERTA MOTORFOCUS 16 2016
Goto menu
This menu contains often used functions and position settings.
Press the
Up (or Down ) button to scroll though the menu items in a circle, and
finish by Esc :
GoStartPos:
Movement to the stored position. After pressing
Ent
button ("
Set"
is shown on
the display) this value is modifiable by the
In/Out
buttons.
GoStartPos
text
becomes GotoPos. after modification. You can move the focuser to the
selected position by pressing again Ent button. If you would like to exit from
this menu, press Esc button. When the focuser is under movement, the
position value on the screen becomes „ Move ”. The focuser moves dynamic.
Long voice signal indicates when the focuser reaches required position, then
the controller leaves the
Goto Select menu automatically. The focuser stops
immediately when you push Esc button for 0,5 seconds! (Emergency stop)
GoFilt0Pos:
Movement to Clear filter (base filter) position. This menu always shows
the initial (or modified) base position. The modified position is calculated
by filter the wheel position and
TempTrack corrections if it’s activated.
This is the default filter position and this is the base from which the
Offset values are calculated. This way filters of slightly varying
thickness can be programmed. e.g. there are 2 filter using Pos0, 3
filters using Pos1 and 1 filter using Pos.2. There are this base position
and 3 user defined offset positions possible – 4 alltogether.
Go Offset1, Go Offset2, Go Offset3:
Moves the focuser by this pre-set value, when changing the filter wheel
manually. If this is the active Offset, the device exits from menu without
movement.
Save Pos.:
This position is the stored value for the GoStartPos menu. If
StartSavedPos function is activated, it will be shown as the wake up
position after turning on the device. It’s also possible to modify the
stored value by
In/Out buttons. Press Esc button to exit without
modification.
SetOffset1, SetOffset2, SetOffset3
To compensate focus deviations with different filters, you can set an
offset of +/- 50 steps in this menu. If you push
Esc or Ent , the device
doesn’t exit from whole GotoSelect menu to reach other Offset
settings faster.