QUICK REFERENCE GUIDE
Ascom i63 VoWiFi Handset
5
Alarm Functions
Alarm function availability depends on the handset variant and the installation environment. For
more information, see the Ascom i63 VoWiFi Handset User Manual, TD 93289EN.
Push-Button Alarm
The Push-button can be configured to send an alarm by a long press or a double press. By default, the long
press is defined as a test alarm and the double press is defined as a personal alarm. The alarm is sent to the
alarm central that distributes it further, then the handset returns to idle mode.
It is possible to trigger the alarm during other activities such as speaking, editing the settings, or while the
handset is locked.
Man-down and No-Movement Alarm
The Man-down alarm is triggered if the handset is tilted (default 45°) from vertical position for a predefined
period of time (by default for 7 seconds). The Man-down icon
shows that the alarm is enabled.
The No-movement alarm is triggered if no movement is detected for a predefined period of time (by default
for 30 seconds). The No-movement icon
shows that the alarm is enabled.
During the warning phase, the handset gives an audio and a vibrating signal (depending on the settings) for
a predefined period of time (by default 7 seconds). At the same time, the handset displays the message
Man-down warning. Cancel?
or
No-movement warning. Cancel?
.
The handset then sends the alarm unless the alarm is cancelled. The handset confirms that the alarm has
been sent by giving a beep and vibrating alert. At the same time, the handset displays the message
Man-
down alarm sent
or
No-movement alarm sent
.
The man-down and no-movement alarm functions are inactive under the following conditions:
• The handset is placed in a charger.
• During calls (depending on the settings) to avoid false alarms if the user tilts the handset or is motionless
during a call.
• For a predefined period of time (by default for 10 minutes) if the Mute button is pressed during the alert
signal.
Activate the Man-down and No-Movement Alarm
1.
In the
Menu
, select
Settings → Alarm → Activate alarm
.
2.
Select the required alarm(s). The corresponding icon(s) appear in the header bar.
Deactivate the Man-down and No-Movement Alarm
1.
In the
Menu
, select
Settings → Alarm → Deactivate alarm
.
2.
Select the alarm(s) to deactivate.
Cancel Man-down and No-Movement Alarm
1.
Press any key or the soft key
OK
to confirm
Man-down warning. Cancel?
or
No-movement
warning. Cancel?
, which appears on the display during the warning phase.
9
TD
93326EN
/
20
February
2020
/
Ver.
A
