25
Using a headset
If you telephone frequently, you can connect a headset to the Eurit and program it to accept and
terminate calls by pressing the loudspeaker key.
Press the MENU key repeatedly until menu item
“Installation” appears. Press the Foxkey repeatedly under
until “Headset” appears.
Press the Foxkey under “change”.
Press the Foxkey under “on” and “ok” to switch on
headset operation.
For optimum performance we recommend using a headset from the Ascom range. For
further information please contact the appointed dealer from whom the telephone was
purchased.
Programming auto-dial keys
You can use the auto-dial keys to program frequently used numbers or functions (see under
relevant functions).
a) Programming telephone numbers
Press the MENU key and the selected auto-dial key (single
or double click).
Enter the telephone number you wish to store.
Press the Foxkey under “ok” to store the number.
Press the relevant auto-dial key twice in quick succession (double click) to access the se-
cond memory.
b) Programming a function
Press the MENU key as often as required until
“Functions” is displayed, then press the required auto-
dial key.
Press the Foxkey under “Function”.
The required function can be selected from the following
table.
Programming your telephone
Installation
Z10:
ok
del
Function
Z10: 06109738400
ok
del
Z10:
ok
del
Function
Z10: F
ok
del
change
Headset: off
ok
Headset: off
on
ETK30_6.PM6
19.03.97, 17:34
25
Содержание Eurit 30
Страница 1: ...Operating Manual ascom Eurit 30...
Страница 34: ...1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6 1 2 3 4 5 6...
