ASCOM DIGISTAT, Руководство пользователя

Страница: 16 / 49

DIG UD IMB IU 0005 ENG V01
Page 16 of 49
Use the
Grab button to acquire an image or a video (see paragraph 1.6).
Use the Add button to acquire an image from an external source (see paragraph 1.7).
Use the Report button to display the examination clinical report (see paragraph 1.8).
Use the Print button to print the examination documentation (see paragraph 1.9).
Use the Visits button to go back to the patient examinations list (Fig 2).
Use the Multi button for multiple selection (see paragraph 1.10.1).
The new examination is recorded independently from any image/video acquisition and any report
specification. A new visit-button has already been created on the examinations list screen (Fig 16
A ).
Fig 16
1.6. How to grab images and videos
!
WARNING!
This paragraph describes the images and videos acquisition procedure to be used when
no specific acquisition device is installed.
Images and videos can be grabbed by remote controls as pedals or manual swithces,
radio-controls etc… If this is the case see paragraph 1.6.3 and the specific hardware
documentation.
When a remote acquisition device is in use the DIGISTAT
®
Image Bank module can
be activated in background as well. That is: module selection is not necessary to images
acquisition.
It is necessary to select, on the module, the relevant patient and visit.
To grab an image/video

Select the patient (See paragraph 1.2 for the patient selection procedure).