background image

10

Safety instructions

This product shall only be used with the following batteries:

P/N: 660089

Battery

P/N: 660161

Battery EX-version

Desktop chargers shall only be connected with power adapters 
supplied by the manufacturer.

Available power adapters:
P/N: 660109

Power supply unit AC/5V DC/1A

ATEX/IECEx safety instructions

Charge the battery

In combination with EX-version, use approved battery types 
only. The battery must be marked with ATEX on the label.

Battery charging or replacement is NOT permitted in a 
hazardous area.

For approved battery types, see EC Type Examination and IECEX 
Scheme Certificate of Conformity and following supplements.

The document above and the EC Declaration of Conformity can 
be found at http://www.ascom.com/ws/solutions_ws/
products_ws.htm and http://www.iecex.com

Remove the battery

The battery is fastened by a screw that requires a special tool; 
Battery pack opener for ATEX. To remove the battery, use the 
opener and turn the screw to horizontal position. Remove the 
battery by pulling the screw. Before fastening the battery again 
the screw has to be in horizontal position. To fasten the battery 
use the opener and turn the screw to a vertical position.
Removing the battery is NOT permitted in a hazardous area.

Содержание A71 - 1














Отзывы: