7
FCC Requirements
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) this device
may not cause harmful interference, and
(2) this device must accept any interfer-
ence received, including interference that
may cause undesired operation.
This equipment has been tested and found
to comply with the limits for a Class A
digital service, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at his
own expense.
IC Requirements
The term “IC:” before the radio
certification number only signifies that
Industry of Canada technical specifica-
tions were met.
WARRANTY
NOTIFICATION
Do not tamper with the Warranty
Seal on the back of your phone.
Tampering with this seal can void
your warranty. Do not attempt to
take your phone apart. Doing so will
void your warranty and your author-
ity to operate the phone. Your phone
does not contain consumer service-
able components. Service should
only be performed by Authorized
Service Centers.
Guidelines for Safe and Efficient Use
