3. Apply Load
Press O
to reject
load.
Press F3 to select
load settings:
% kVA or kW, kVA
or kW and cos
φ.
Set load and/or
cos
φ
with the +
or - keys.
Press I to
apply load.
Each time you
press I (apply load),
load correction will
correct load at the
actual operating
voltage.
i
4. View Instrumentation
Press F1 to view
Instrumentation
page 2.
Press F1 to view
Instrumentation
page 3.
Test page 2
shows line-line
voltage and Test
page 3 shows
line-neutral
voltages.
i
5. Automatic Load Control
The status bar
will show either
manual or auto.
i
Press F2 to
toggle between
Manual and
Auto test.
Press F3 to
edit auto test
settings.
Press F1 and
F3 to select
setting.
Edit selection
with the + or -
keys.
Auto test can
have up to 16
load steps.
i
The LED on the keypad
will illuminate when load
is applied. It will flash
when an auto test is in
progress.
i
The status bar
shows the time
load has been
applied.
i
The status bar
shows the load
step in progress
and the time
load has been
applied.
i
Press F4 to
confirm.
Press I to start
the Auto test.
Load can be
rejected at any
time with the O
button.
i
Press F4 to view
the Test page.
