SAT-IF CWDM Optical Transmitter and Receiver
Solutions Provider for FTTx, RFoG, and HFC
www.ascentcomtec.com
Page 7 of 13
Note
Installing and removing the equipment when it stops working.
Pre-installation instructions:
User note: optical fiber, SC/APC adjustors, SC/APC connectors, SC/PC connectors
Picture1: optical fiber. Suggested Bending radius bigger than 30mm. (Bending radius: a very
small section of the curve with a circular arc that the radius of the circle formed by the arc is
the radius of curvature. See as picture 1. Bending radius for Circle 1 bigger than Circle 2)
Picture2: optical fiber adaptor & protective cap
Picture3: optical fiber connector & protective cap
Picture4: Connector in green color for SC/APC, connector in blue color
for SC/PC
Installation instructions:
The transmitter can be wall mounted using the brackets that are incorporated in the product
mechanics. The space is provided for connecting the power lead and for correct ventilation of
the product.
Keeping sufficient space for fiber cable to avoid excessive bending radius of fiber cable,
resulting in excessive optical loss.
Connecting and disconnecting the fiber to transmitter (picture 1-3 below)