Ascent AP224S, Руководство пользователя

Страница: 38 / 79

AP224S GPON HGU User Manual
Figure 3-39: VoIP Advanced Settings (1)
Parameter Description
SIP Transport Protocol Select the SIP transport protocol: UDP or TCP.
Enable T38 Fax Enable T38 mode.
Enable Echo Canceller Enable echo canceller.
Dial Plan Default is:
00x.|0[1-9]x.|[1-9]x.|ExxFx.F|FxxF|E54ExxxxxF|ExxExxsxxxxxsx
.F|ExxExxExxxxxxxxF|FxxF|EExx|FxxExxF|ExxF|EExxExxxxEx
xxxxxxxF|FExxExxxxExxxxxxxxF|FF|ExxExxxxF|FExx|ExxEx.F|
ExxEx.Ex.F|E98x.|E5s.|F54ExxxxxF
DTMF Mode DTMF type: Refers to the transfer mode of users pressing buttons while a voice
call is active. It can be set as 3 modes: In-Band, RFC2833, and INFO message. If
the mode is set as In-band transport, the signal from pressing buttons will be
transferred along with the voice signal. If the mode is set as INFO message, the
signal from pressing buttons will be transferred in the signaling. Note that the
INFO message mode only supports nonfast-connections.
Outgain Select outgain value.
Ingain Select ingain value.
SIP Register Interval Set the SIP register internal value, default value is 1000.
Register Interval Set the register internal value, default value is 2.
Dial Tone Duration Set the off-hook dialing expire time, default value is 10 (range: 10 s to 20 s).
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com Page 38 of 79