Ascent Communication Technology ACT AT5200, Краткое руководство пользователя

Страница: 9 / 24

AT5200 FTTX Multiport EDFA
Solutions Provider for FTTx, RFoG, and HFC www.ascentcomtec.com Page 9 of 24
Single Input
Dual Inputs
Identification Name Remarks
LCD LCD Display To display the parameters of the device
STATUS Device Status LED Green, Device working
LED Red
，
Device alarming or faulty
INPUT Fiber Input LED Green, Input within requested range
LED Red
，
no input or out of the requested range or only
single input connected in dual inputs model
OUTPUT Fiber Output
LED Green
，
Fiber output is within normal range
LED Red
，
Fiber output is out of normal range
POWER Power Supply
LED Green
，
Dual power supply working
LED Yellow
，
Single power supply working
CATV IN CATV Input 1550nm fiber input Single input
CATV IN1 CATV Input 1 1550nm fiber input 1 Dual Inputs
CATV IN2 CATV Input 2 1550nm fiber input 2 Dual Inputs
GPON GPON Data Input OLT Input CWDM
XGPON XGPON Data Input OLT Input CWDM
OTDR OTDR Signal Input
OUT Fiber Output Fiber Output
Buttons Start menu page turning and set the device
ENT Enter Confirmation after menu page turning and device setting
OFF/ON Key ON pump laser on, OFF pump laser off
RF TEST RF test point Output level 78 dBµV to 82dBμV Optional
RS232 RS232 Port Local programming
RJ45 RJ45 Port Remote SNMP and WEB supported