Ascend E1 MAX series Скачать руководство пользователя страница 100

Страница: 100 / 166

4-8

Preliminary November 4, 1998

MAX 4000 Series Hardware Installation Guide

Navigating and Securing the Interface

Special display characters and keys

Table 4-1 lists the special-purpose keys and key combinations you can use in the
palmtop-controller and the control-monitor displays.

Table 4-1. Special keys for palmtop-controller and control-monitor displays

Palmtop-
controller

Control-monitor

Operation

Right-Arrow, Return, Enter,
Ctrl-Z, Ctrl-F

Enumerated parameter: Select the
next value.

String value: Move one character to
the right or enter the current input.

Menu: Open the current selection.

Left-Arrow, Ctrl-X, Ctrl-B

Enumerated parameter: Select the
previous value.

String value: Move left one character
or exit the current input.

Menu: Close the current selection.

Down-Arrow, Ctrl-N

Move down to the next selection.

Up-Arrow, Ctrl-U, Ctrl-P

Move up to the previous selection.

N/A

Ctrl-V

Move to the next page of the list.

N/A

Tab, Ctrl-I

Move to the next window.

Back-Tab, Ctrl-O

Move to the previous window.

TOGGLE
STAT

N/A

Toggle to a status menu from the edit
menu and vice versa.

Shift->

Delete

Delete the character under the cursor.

Shift-<

Backspace

Delete the character to the left of the
cursor.

Shift-^

N/A

Overwrite the character under the
cursor with a space.

Ctrl-D

Open the DO menu.

N/A

Ctrl-T

Return from or go to the Simplified
Menus.

N/A

Ctrl-L

Refresh the VT100 screen.

N/A

Ctrl-C

Return from the MIF to the normal
menus.

Dial from the currently selected
profile.

Содержание E1 MAX series







































































































































































Результаты поиска

Содержание E1 MAX series

Отзывы:

Ascend E1 MAX series, Руководство по установке оборудования, Страница: 100 / 166

Результаты поиска

Содержание E1 MAX series

Отзывы: