_____________________________________________________________________
ATLANTIC SATELLITE CORPORATION
MODEL ASC300LW
BEACON RECEIVER
17
9.0 Repair Service Policy:
Warranty Repair Return Procedure
Before a warranty repair can be accomplished, a Repair Authorization must be received. It is at this time
that ASC will authorize the product or part to be returned to the ASC facility or if field repair will be
accomplished. The Repair Authorization may be requested in writing, email or by calling:
Atlantic Satellite Corp.
259 Expressway Court
Virginia Beach, Virginia 23462 USA
T: 1-757-318-3500
[email protected]
Any product returned to ASC for examination must be sent prepaid via the means of transportation
indicated as acceptable to ASC. Return Authorization Number must be clearly marked on the shipping
label. Returned products or parts should be carefully packaged in the original container, if possible, and
unless otherwise indicated, shipped to the above address.
Non-Warranty Repair
When a product is returned for any reason, Customer and its shipping agency shall be responsible for all
damage resulting from improper packing and handling, and for loss in transit, not withstanding any defect
or nonconformity in the product. By returning a product, the owner grants ASC permission to open and
disassemble the product as required for evaluation. In all cases, ASC has sole responsibility for determining
the cause and nature of failure, and ASC’s determination with regard thereto shall be final.
10.0CE Declaration of Conformity:
We, the Manufacturer Atlantic Satellite Corporation at the following location:
Atlantic Satellite Corporation
259 Expressway Court
Virginia Beach, VA 23462
declares, that the following product:
Product Name: Beacon Receiver
Model Number: ASC300L ASC300L-D ASC300LW ASC300LW-D
The product complies with the requirements of the following Directives:
•
LVD Directive 73/23/EEC (as amended by 92/C210/01 and 93/68/EEC)
•
EMC Directive 89/336/EEC (as amended by 92/31/EEC and 93/68/EEC)
and conforms to the following standards:
•
EN 60950:1992 +A1, A2, A3:1995 AND A4:1996
•
EN 55022:1987 class A. sections 4 & 5
•
EN 50082-1:1992 Part 1, commercial &light Industry
•
IEC 801-2:1991, 4kV CD, 8kV AD
•
IEC 801-3:1984, 3V/m
•
IEC 801-4:1988, 2.0 kV Main, 1kV Signal & Control Lines
Warning notice:
•
This equipment is intended for commercial and light industrial use only.
•
This is a Class “A” product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
