All rights reserved. Nothing herein should be stored in automated database or made public in any form or by any means, electr onic,
mechanical, photocopying, recording or otherwise, without prior permission from ASC Group. This publication may only be used for ASC products.
6
2.8
Assembly Instructions
Check that all materials meet the annual inspection labels and check all materials for damage. If in
doubt, contact ASC or your dealer for any questions. Aluminum Scaffoldings should only be erected
by people with enough and proven experience.
Floor height 0.70 m (A)
1.
Insert the wheels (
8
) into the folding unit 6-rung (
1
) at the bottom
and secure with a locking clip (
9
).
2.
Open the folding unit, place the platform without trapdoor (
3
) on
the 2
nd
rung and secure the folding unit with a locking clip in the
hinge piece.
3.
Put the wheels (
8
) on the brake and place a horizontal brace (
4
) on
the upper rung (opposite the folding unit). This will create a handrail
at hip height.
5.
Put the side board holders (
7
) to the upright on the top work floor
and place the side boards in the slots of the side board holders.
6.
Check again that the scaffolding is properly positioned, the wheels
are on the brake and the stabilizers are firmly on the ground.
If you place the platform on the 3rd rung or higher, you will need all the parts from the
composition KMA2 (B).
Floor height 1.85 m (B)
1.
Place the wheels (
8
) in the folding unit 6-rung (
1
) at the bottom and secure with a locking clip
(
9
).
2.
Open the folding unit, place the platform with trapdoor (
3
) on the 5
th
rung and secure the
folding unit with a locking clip in the hinge piece.
3.
Place the (tele-)stabilizers (
6
) and make sure they are firmly on the ground. Always place a
stabilizer link under a rung (to prevent slipping). For the correct assembly see section 2.5.4.
4.
Open the folding unit 3-rung (
2
) on the ground, click in 2 horizontal braces (hip and knee
height) and assemble it in the same form as the underlying folding unit. Secure all uprights
with locking clips.
5.
Climb up on the inside and snap the side board holders (
7
) to the upright on the top work
floor and place the side boards in the slots of the side board holders.
6.
Check again that the scaffold is properly positioned, the wheels are on the brake and the
stabilizers are firmly on the ground.
Floor height 2.70 m (C)
1.
Insert the wheels (
8
) into the folding unit 6-rung (
1
) at the bottom and secure with a locking
clip (
9
).
2.
Open the folding unit, place the platform with trapdoor (
3
) on the 2
nd
rung and secure the
folding unit with a locking clip in the hinge piece.
3.
Place the (tele-)stabilizers (
6
) and make sure they are firmly on the ground. Always place a
stabilizer link under a rung (to prevent slipping). For the correct assembly see section 2.5.4.
4.
Open the 2
nd
folding unit 6-rung (
1
) on the ground, click in 2 horizontal braces (hip and knee
height) and assemble them on top of each other in the same shape as the underlying folding
unit. Secure all uprights with locking clips.