10
asberprofessional.com
asberprofessional.com
TROUBLE SHOOTING
PROBLEM
PROBLEM CAUSE
SOLUTION
BURNER AND/OR PILOTS
NOT TURN ON
GAS SUPPLY TO COOKING
EQUIPMENT IS OFF
TURN ON GAS SUPPLY
UNIT PRODUCING CARBON
DEPOSITS
GAS TYPE
VERIFY CORRECT GAS
GAS SUPPLY PRESURE
CONTACT LOCAL GAS
SUPPLIER
PRIMARY AIR NOT
ADJUSTED PROPERLY
ADJUST AIR SHUTTER
ORIFICE TOO BIG
VERIFY ORIFICE SIZE
PILOT WILL NOT REMAIN LIT
PILOT FLAME NOT
ADJUSTED
ADJUST PILOT FLAME
DRAFT CURRENTS NEAR
EQUIPMENT
FIX DRAFT
NOT ENOUGH VENTILATION
CONTACT HVAC
CONTRACTOR
DEBRIS OR GREASE
CLOGGING PILOT BURNER
CLEAN DEBRIS AND GREASE
FROM PILOT BURNER
EXCESSIVE FLARE-UP
OVERLOAD OF OIL AND
LEFTOVERS
CLEAN AND PREPARE PAN
NOT HEATING PROPERLY
ORIFICES DIRTY/CLOGGED
CLEAN ORIFICE, MAKE SURE
THERE IS NO RESTRICTION
IN THE ORIFICE BURNER
LOW GAS PRESSURE
INCREASE GAS PRESSURE
TO 5” WC (NAT) OR 10” WC
(L.P.)
GRATES DIRTY/CLOGGED
CHECK AND CLEAN TOP
GRATES
IF THE VENTILATION IS TO
STRONG IT WILL DRAFT
HEAT FROM THE
COOKING/BROILING
SURFACE
CALL HVAC CONTRACTOR
