English 4
g) You can now position the transparent plastic face in such
a way until it has almost reached its final position. You
only have to carefully press the small pin (fig. 1 A) and to
lock the transparent plastic face in place.
4. Do not forget to register your doorbell-pushbutton with
your »signolux«-receivers!
a) Keep the function button of the according receiver pressed.
The symbols light up in sequence. Release the button
when the desired symbol is lit.
b) Press the doorbell-pushbutton.
c) Wait for approx. 20 seconds and test the function.
5. Mounting the doorbell pushbutton
You can mount the doorbell pushbutton using the supplied
strips of double-sided tape. Take care to adhere it to a
smooth, dry and clean surface.
Important note:
Kindly keep in mind that metal parts and other building
materials may interfere with the transmission of the radio
signal. As they can be either visible or hidden at the
desired mounting location you should always carry out
a functional test at the mounting location before starting
the mounting process, and, if required, choose a different
mounting or installation location if the reception is not
guaranteed.
Technical data
Work range
-10 bis 40°C
Radio frequency
418 MHz / 915 MHz
Range (open spaces)
up to 200 m
HF capacity
<10 mW
Battery
CR2032
Battery service life
(5 activations per day)
18 months
Dimensions (HxWxD)
41 x 90 x 23 mm
Weight
41 g
This device complies to the following IC standards:
47 CFR Part 15; 2013
RSS-210 ISSUE 8
Technical specifications subject to change without prior notice.
TürttasterBA_08_08_15_CA.indd 4
06.10.2017 08:18:03