Copyright
1997 Asanté Technologies, Inc. All rights reserved. Asanté and IntraStack are registered trademarks of Asanté Technologies, Inc.
IntraStack 6014DSB —
READ ME FIRST
P/N 06-00374-00 Rev. B
User’s Manual Erratum
The following are some additions and/or corrections to information contained in the
IntraStack 6014DSB User’s Manual.
Forwarding Database Age-Out Timer
The Forwarding Database Age-Out Timer’s default setting is
300 seconds
.
Default Spanning Tree Parameters
The IntraStack 6014DSB is shipped with the following default Spanning Tree parameters:
❏
Hello Time — 2 seconds
❏
Max Age — 20 seconds
❏
Forward Delay — 15 seconds
Console Default Time-Out
The Console Interface’s default time-out setting is
5 minutes
.
This parameter can be changed while connected to the Local Management Interface via the
Console port (open the
Configuration
menu and type
T
“set idle time-out”); however, the
setting is
not
retained after a system reset.
Telnet Default Time-Out
The default Telnet Idle Time-Out setting is
20 minutes
. This setting
cannot
be changed.
Installing MII Expansion Modules
After installing an MII expansion module(s), power cycle the IntraStack 6014DSB (turn the
IntraStack off and then on).
The power must be cycled in order for the IntraStack 6014DSB to recognize the installed MII
expansion modules.
