manualshive.com logo in svg

Asante IntraSpection Personality Module, Руководство пользователя, Страница: 71 / 88

Поделиться
Скачать
Asante IntraSpection Personality Module Скачать руководство пользователя страница 71

Trap Receivers

Page 6-15

Trap Receivers

This menu allows you to determine the management stations that will 
receive traps from the SuperStack II Switch 1000.  

▲

Important:

Refer to the SuperStack II Switch 1000’s 

User Guide for instructions on setting traps. 

∆

Note:

For instructions on using this menu, see “Managing 

Trap Receivers” on page 4-12.

Table 6-10 describes each field in the Trap Receivers menu.

Table 6-10  Trap Receivers Menu

Field

Description

Trap index

Read-only field; displays the number of the trap 
receiver entry.

Status

Configurable field; displays the status of the trap 
receiving station’s entry.

❏

active — trap receiving station’s entry is 

active.

❏

notInService — trap receiving station’s entry is 

not active (deletes the trap receiving station 
when selected).

Note:  Refer to the SuperStack II Switch 1000’s MIB for 
information on the other options available in this field.

Receiver Address

Configurable field; displays the IP address of the man-
agement station that can receive traps.

Community String

Configurable field; displays the write community 
string of the receiving management station.

Category

Configurable field; determines which traps are to be 
received by the trap receiving station.

▲

 Important:   This is a 32-bit mask field.

❏

FF:FF:FF:FF  — enables all traps

❏

‘00000001’h — high priority configuration 

traps.

❏

‘00000002’h — low priority configuration traps

❏

‘00000004’h — high priority security traps

❏

‘00000008’h — low priority security traps

❏

‘00000010’h — alarms and polling traps

 book  Page 15  Thursday, September 4, 1997  3:47 PM

Содержание IntraSpection Personality Module

























































































Отзывы:

Нет отзывов