Asante IntraCore 65120 Series, Руководство по началу работы, Страница: 15 / 24

15
Asanté IntraCore 65120
2.10 Connecting to the Network
The IntraCore 65120 unit may be connected to an Ethernet network
with the unit powered on or off.
Use the following procedure to
make your network connections:
1.
Connect network devices to the IntraCore 65120, following the
cable guidelines outlined below.
2. After the unit is connected to the network, it can be configured
for management capabilities. Please refer to the user’s manual
on the IC 65120 CD-ROM.
2.10.1 10/100BaseTX Ports Cabling Procedures
The ten 10/100 ports on the IntraCore 65120-2G allow for the con-
nection of 10BaseT or 100BaseTX network devices. The ports are
compatible with IEEE 802.3 and 802.3u standards.
Important: The IntraCore 65120 must be located within 100 meters
of its attached 10BaseT or 100BaseTX devices.
Use the following guidelines to determine the cabling requirements
for your network devices:
•
Connecting to Network Station: Category 5 UTP (Unshielded
Twisted-Pair) straight-through cable (100 meters maximum)
with RJ-45 connectors.
•
Connecting to Repeater/Hub/Switch: Category 5, UTP cross-
over cable (100 meters maximum) with
RJ-45 connectors.
•
Connecting to Repeater/Hub/
Switch’s Uplink port: Category 5,
UTP straight-through cable (100
meters maximum) with RJ-45 con-
nectors.