asante.com/intracore
4
SPECIFICATIONS
Ports
Gigabit Ethernet:
48 x 10/100/1000BaseT Gigabit Ethernet ports with Auto-Uplink™: RJ-45 shielded connectors
4 x 1000BaseX ports: SFP MiniGBIC
Combo ports 21-24 will auto-detect/failover between RJ-45 and SFP MiniGBIC; SFP has priority
Configuration:
IEEE Auto Negotiation (sets 10/100/1000 Mbps speed and half/full duplex) or manual configuration via
management
Console:
Male DB9 RS-232C DTE with auto-baud (9.6 to 115K)
Emergency Power:
EPS36 port for emergency power supply
Status Indicators
System:
Power and emergency power supply (EPS)
Per Port:
2-color LEDs for link/activity and speed
Performance
Efficiency:
Wire-speed, Layer 2 Gigabit Ethernet switching
Switch Architecture:
Quad 24Gbps segments with 20 Gbps crossbar and 4 MB (total) on-board frame buffers
Store-and-forward design with anti-HOL (head of line) blocking and broadcast storm protection
Flow Control:
Selectable IEEE 802.3x flow control (full duplex) and back pressure (half duplex)
Link Aggregation:
Up to 8 trunks x 8 ports/trunk; compatible with IEEE 802.3ad and Cisco EtherChannel
Jumbo Frames:
Up to 9 KB
Forwarding MAC Table:
16K addresses with automatic learning and aging
Buffers:
32 MB SDRAM
Management
In-Band:
Choose from web (HTML, HTTPS), SNMP v2, RMON and Telnet/SSH with Cisco-like command line
interface (CLI) for up to 4 sessions. Group management with optional IntraCore Management Utility
(ICMU)
Out-of-Band:
Direct connect to console port with ANSI VT-100 compatible terminal
Security:
Password, IP address (5 entries), secure shell (SSH v2) and HTTPS
Mirror:
Monitor any port from any port (at the same speed)
Internal:
Thermal plus system events (memory allocation, start-up, traps, watch dog timer, buffer, stack)
Firmware:
Dual banks of operational and configuration code saved to flash memory
