manualshive.com logo in svg

Asante IntraCore 3524 Series, Руководство пользователя, Страница: 48 / 82

Поделиться
Скачать
Asante IntraCore 3524 Series Скачать руководство пользователя страница 48

 
 
 

48 

• 

Adding and deleting untagged sets 

• 

Sharing and unsharing VLANs 

• 

Inserting and removing MAC addresses 

• 

Toggling management access 

 
To access the VLAN Management Menu, type 

v 

in the Configuration Menu. A screen similar to the following 

will appear: 
 

IntraCore 3524 VLAN Management Menu 
 
VLAN Version:                   1     VLAN Type:               Port Based 
Max. Supported VLAN ID:      4094     Max. Supported VLANs:    64 
Number of VLANs Configured:     1     Number of Active VLANs:  1 
 
 
<Cmd>     <Description> 
  v       VLAN Group Static Configuration 
  p       VLAN Port Attribute Configuration 
  d       Display VLAN Groups Summary 
  a       Display Port VLAN Attribute Summary 
  r       Reset VLAN Configuration to Factory Default 
  q       Return to previous menu 
 
Command>

 

 

4.4.2 Configuring Static VLAN Groups 

 
To access the VLAN Group Static Configuration Menu, type 

v 

in the Configuration Menu to access the 

VLAN Management Menu, then type 

v 

again to access the VLAN Group Static Configuration Menu. A 

screen similar to the following appears: 
 

IntraCore 3524 VLAN Group Static Configuration Menu    VID: [0002] 
 
Name: test2                             Created By: Mgmt 
Mgm Access: Enable          Status: Active 
Unit     Port List  1      8  9     16  17    24  25    32 
======              ========  ========  ========  ======== 
1                   --------  --------  --------  -KXXXXXX    +: static 
2                   --------  --------  --------  KKXXXXXX    d: dynamic 
3                   --------  --------  --------  KKXXXXXX    -: Not Member 
4                   --------  --------  --------  KKXXXXXX    K: Stacking 
5                   --------  --------  --------  KKXXXXXX 
6                   --------  --------  --------  KKXXXXXX 
7                   --------  --------  --------  KKXXXXXX 
8                   --------  --------  --------  KXXXXXXX 
 
<Cmd>     <Description>                 <Cmd>     <Description> 
  c       Create VLAN                     r       Remove VLAN 
  e       Set VLAN Name                   t       Toggle Mgmt Access 
  m       Move ports to this VLAN         d       Delete Port Members 
  o       Overlap Ports To This Vlan      f       Display Vlan-Grp Information 
  l       Toggle To Vlan-prt Config Menu 
 
Command> 
S)elect VID     N)ext VLAN    P)rev VLAN    H)elp     Q)uit

 

 
Navigate to the VLAN that you want to configure by typing a command (

s

, 

n

 or 

p

) as shown at the bottom of 

the screen. With the Select command, you select a VLAN by its VLAN ID (VID); you can type the VID of an 
existing VLAN, or the VID of a VLAN you will create. 
 

Содержание IntraCore 3524 Series



















































































Отзывы:

Нет отзывов