Asanté FriendlyNET FS4016P Installation Guide
Page 5
Using the Uplink connection
To connect a switch or hub, note the following:
1.
One normal/uplink push button on the front panel allows users to select to connect to a PC or a
hub/switch. The default setting is in the Normal (MDI-X) position, i.e. the out position. The port is
configured to connect with a PC. When the push button is pressed in (MDI), it allows users to con-
nect with a hub or a switch using straight-through twisted pair cable.
∆
Use a straight-through cable to connect uplink port or use a crossover cable to
connect to any port except uplink port. (Do not connect both uplink ports
together, and do not use a crossover cable to connect with the uplink port).
Normal/Uplink
8
16
9
16
8
16
Normal/Uplink
9
Normal/Uplink
8
16
9
16
8
16
Normal/Uplink
9
Push button in the
OUT position
Push button in the
IN position
FS40016P.fm Page 5 Tuesday, March 16, 1999 5:53 PM
