Asante AsanteTalk, Руководство пользователя, Страница: 28 / 36

Asanté Talk Ethernet to LocalTalk Converter
28
8. Go to the AppleTalk control panel of the Mac. Make sure it is
set to “connect via Ethernet.”
9. On the Asanté Talk , the power and “LI” LEDs should now be lit.
10. Go to the “Chooser” in the Mac. Select the appropriate Apple-
Talk driver for your printer. The window to the right should then
show your printer. For questions regarding which driver should
be selected, please contact your printer’s manufacturer.
11. Proceed with printer setup as outlined by the printer’s manufac-
turer.
The Asanté Talk , an Ethernet hub/switch, and one printer
Follow the steps below to configure the Asanté
Talk , an Ethernet
hub or switch, and one printer:
1. Plug Asanté Talk into the Ethernet hub/switch with the SILVER
Ethernet cable.
2. Power up a Mac that is also connected to the Ethernet hub/
switch.
3. Go to the AppleTalk control panel of the Mac. Make sure it is
set to “connect via Ethernet.”
4. Connect the printer to the Asanté Talk using either the din-8 to
din-8 cable or LocalTalk connectors as described in item num-
ber 5 above.
5. Power up the printer. Wait until printer is completely warmed up
and ready to print.
6. Connect the printer to the Asanté Talk using either the din-8-
din-8 cable or LocalTalk connectors as described above.
7. Plug the power transformer into the Asanté Talk .
8. Wait 30 seconds.
9. On the Asanté
Talk , the power and “LI” LEDs should now be lit.
10. Go to the “Chooser” in the Mac. Select the appropriate Apple-
Talk driver for your printer. The window to the right should then
show your printer. For questions regarding which driver should
be selected, please contact your printer’s manufacturer.
11. Proceed with printer setup as outlined by the printer’s manufac-
turer.