Asante AsanteTalk, Руководство по установке

Страница: 10 / 16

Installation Process
Page 1-10
Attaching the AsantéTalk to your Ethernet
Network
To create an Ethernet network with the Apple iMac computer system,
Asanté includes two Ethernet cables.
The first cable is YELLOW in color and is designed as an industry -
standard “crossover” cable. This cable is used for communicating from
the Apple iMac directly to the AsantéTalk.
The second Ethernet cable is SILVER in color and is wired as an
industry - standard 10BaseT-ethernet cable. This cable is used when
connecting the AsantéTalk to an Ethernet Switch or Ethernet Hub.
Installation may require a longer Ethernet cable. Please follow IEEE
Ethernet cabling requirements for wiring and installation.
Attaching the AsantéTalk directly to your
iMac
The Yellow Crossover cable is used to establish the physical network
connection where the configuration consists of the AsantéTalk and the
Apple iMac system. To connect this cable, simply open the Apple iMac
door located on the right-hand side (facing the front of the iMac) of the
iMac. Insert one end of the cable into the RJ45 female cable connector.
The other end of the Yellow cable will attach to the RJ45 port on the
AsantéTalk. Insert the cable end into the appropriate connector.
∆
Review the AsantéTalk Quick Start Guide for fur-
ther details.
∆
During bootup, the Apple iMac will attempt to
auto-negotiate with any attached ethernet device.
To eliminate auto-negotiation problems, make sure
the AsantéTalk is powered up before booting the
iMac.