4
Multi Variable Air Conditioners Wall Mounted Type Indoor Unit
2.7 Installation of the indoor unit
A. When routing the piping and wiring from the left or right side of the indoor unit, it is necessary to cut
off the tailings of the pipe left on the holder of the unit. (Shown in Fig.5)
◆
Cut down tailings 1 when only the power cord is led.
◆
Cut down tailings 1,2 (or 1,2,3) when the connection cord and wire are led.
◆
The piping types
①
,
② , ③
are recommended.
B.
Let the tubing and cord pass though the piping hole after tied up (refer to Fig .5 (d)).
C.
Hang the claw behind the indoor unit on the pothook on the wall panel, and move the unit left and right
to check if the body is firm.
D.
Guarantee that the installation height of the indoor unit should be 2.5m above the floor.
(a)
（
d
）
(b)
①
Right tubing
②
Right rear tubing
④
Left tubing
③
Left rear tubing
Low material
1
Low material
2
Low material
3
（
c
）
Wrapping tape
Control cord
Drain hose
Connection
pipe
Power
connection
cord
Fig.5