7
E
n
gli
s
h
FAT
Fat burn. Data is cal-
culated based on the
weight of the cyclist
and current cycling
data.
KM+
Displays how far you have left in km
until you reach your target distance.
Hold in [SET] to toggle between “KM+”
and “KM-”. Press [SET] to confirm and
open the settings mode so you can en-
ter the target distance. Enter the target
distance for your trip. “KM+” displays
how far you have left until you reach
your target distance. “KM-” counts
down the distance remaining until you
reach your target. The digits flash when
you have reached your target.
TIME+
Displays the time remaining of
your planned trip duration. Hold in
[SET] to toggle between “TIME+”
and “TIME-”. Press [SET] to con-
firm and open the settings mode
so you can enter the length of
time you wish to cycle for. Select
the desired trip time. “TIME+”
displays the elapsed cycling time.
“TIME-” counts down until the set
trip duration is reached.
CO2
Displays how much carbon-dioxide emis-
sion you have prevented by cycling instead
of driving a car. The amount is calculated
by multiplying the distance you have travel-
led by the CO2 emission of a motor vehicle
per kilometre. Hold in [SET] to set the CO2/
km emission value. The default value is set
at 159 g/km. Since the value displayed is
synchronised with the distance you have
cycled, it is reset every time you reset your
Trip Distance.
PLAN
Your planned trip distance can be entered here.
Hold in [SET] to set the distance. The default
setting is 10 km. Once your planned trip dis-
tance has been set the computer continuously
calculates the time required to complete the
trip based on your average speed. The data is
updated every 3 seconds. The progress of the
trip is also expressed using a 10-square grid.
Every time 1/10 of the trip is completed, one of
the squares will fill/illuminate.
Scan
Auto-scanning
.
The computer will alternate the display of “DIST”, “AVGSPD” and “RIDETM”
automatically in 2-second intervals.
Maintenance
The Maintenance symbol will appear on the display when the distance set for the re-
gular service of your bike has been travelled. The symbol will disappear when the set
interval has been reset. The maintenance distance can be reset using the settings in the
ODO Mode.
