10/10
www.aosong.com Guangzhou Aosong Electronics Co.,Ltd. Tel
:
400
-
630
-
5378
Versior
:
V1
.
1
Version
Date
Version
Page
Alteration
Initial Version
This manual is likely to change sometime without prior notice.
Attention
Warning of personal injury
ESD Protection
If the Buyer intends to purchase or use the Aosong
products without any application license and
authorization, the buyer shall bear all compensation
for personal injury and death resulting therefrom, and
shall not claim for compensation including various
costs, compensation fees, lawyers, etc. Expenses and
so on with the managers and employees of Aosong
Company, as well as subsidiaries, agents, distributors,
etc.
ASAIR
®
2018
/
11
2018
/
12
V1.1
V1.0
1-10
1-10
Newly added protocol description and instruction parameters.
Do not apply this product to safety protection devices
or emergency stop equipment, as well as any other
applications that may cause personal injury due to
the failure of the product. This product cannot be
used unless there is a special purpose or with an
authorization to use it. Please refer to the product
data sheet and Application guide before installing,
processing, using or maintaining the product. Failure
to comply with this recommendation may result in
death and serious bodily injury.
Due to the inherent component design, it is sensitive
to static electricity. In order to prevent the damage
and the reduction of the product's performance caused
by static electricity, the necessary anti-static measures
should be taken when applying this product.
Quality Assurance
Our company provides 12-month (1-year) quality
assurance for buyers of its products (calculated from the
date of delivery) based on the technical specifications in
the data manual of the product published by Aosong. If
the product is found to be defective under warranty, our
company will provide free maintenance or replacement.
Users need to satisfy the following conditions:
● Notify our company in writing within 14 days after the
defect is found
● The defect of this product will help to find out the
deficiency in design, material and technology of our
product.
● The product should be sent back to our company at
the buyer's expense.
● The product should be under warranty.
Our company is only responsible for the defective products
which are used in the occasions that meet the technical
requirements of the product. Our company makes no
warranties or written representations regarding the use of
its products in special application occasions.
At the same time, the company does not make any
commitment to the reliability of the products applied to
products or circuits.
©
Copyright 2018 , ASAIR® .
AHT10 Technical Manual
