ASAHI Pentax K2 23602, Руководство по обслуживанию

Страница: 5 / 14

23602 /13 4
Wind up top 2nd mech. plate assembly (C200) with driver and loosen wind shaft without
moving main gear. Then give back-tension to sprocket gear (C16)
Choose the proper coupling 2nd gear (C205) and install it in the above-mentioned way.
4. Memory block assembly (T400)
After cocking mirror housing, 02mm clearance is necessary between delrin and the longer
contact piece of memoiy block (T400) — See Fig. 12 A
After releasing mirror housing and when mirror stays up, also 02mm clearance is necessary
between two contact pieces of memory block. See Fig. 12 B
5. Shutter dial seat assembly (F000)
Set shutter dial at “B”, and pull meter coupling plate assembly (0-A8) toward counter dial block.
Otherwise, shutter mechanism will not work properly.
Fig. 11
Fig. 12