5
●
When you fluid find leak, take no stopgap measures, such as covering the leak hole by hand or
adhesive tape. Such measures will only increase potential hazards.
●
When you find fluid leak, replace the hose with a new one or contact our authorized repair shop.
●
Use a hose that is compatible with our standard specifications.
●
Our fluid hose standard specifications ensure a sufficient hose durability in an normal operating
environment. However, tension is applied to a hose for many hours, it deteriorates in a relatively
short time. When tension is applied frequently, it may not last longer than half a year. Under
normal operating conditions, replacement in a year would be recommended.
<<Moving Parts Hazard>>
●
There is an air-motor piston rod in the air-motor cap. The piston rod moves up and down as air is
supplied to the air-motor. When operating the pump, be sure to put the air-motor cap on so that
your fingers may not be struck or caught in a pinch or shear point by the moving part, and that your
eardrum may not get injured by the deafening exhaust sound.
●
There is a step at the piston rod connecting nut in between the air-motor and material cylinder,
which moves up and down as the pump operates. So don’t touch it when the pump is operating.
If you do so, you may get your fingers caught in a pinch point by the packing retainer.
●
When checking or servicing the pump and component parts, bring the pressure down in advance in
accordance with the “Pressure Relief Procedure” on page 3 in order to prevent the pump from
behaving unexpectedly.
●
With the pump running, don’t leave the painting equipment unattended.
Each time you stop spraying for a break or at the end of shift, shut off the air supply.
●
Keep people away for the pump, children and adults who are not familiar with the airless painting
operation.
WARNING
