AS R Li 7, Руководство пользователя

Страница: 18 / 40

18
●
If you want to leave standby mode, but the remote
control or app is not at hand: Turn your hearing
instruments off and on again (via rocker switch or by
shortly placing them in the charger until a green LED
lights up). In this case, the default volume and hearing
program are set.
Adjusting the volume
Your hearing instruments automatically adjust the volume
to the listening situation.
X
If you prefer manual volume adjustment, press the
upper part of the rocker switch to increase the volume
or press the lower part to decrease the volume.
Refer to section "Controls" for the setting of your
rocker switch.
An optional signal can indicate the volume change. Once
the maximum or minimum volume has been reached, you
may hear an optional signal tone.
Changing the hearing program
Depending on the listening situation, your hearing
instruments automatically adjust their sound.
Your hearing instruments may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the program
change.