background image

7

2   Safety

2.3  Responsibility of the user

Operator means any natural or legal person who operates or controls the device or 

makes it accessible to third parties for use and who is responsible for the safety of 

the user or third parties.
• 

In particular, observe the general safety and occupational safety regulations 

of the BG Chemie in Germany or the responsible regional professional 

association for chemistry and health (e.g. OSHA in the United States), the 

applicable technical rules for hazardous substances, the Hazardous Substances 

Ordinance, the CLP Ordinance, the company own standard operating 

procedures (SOPs), as well as the regulations of the ATEX Directive, the 

technical guidelines “Flammable liquids” and the explosion protection guidelines 

of the BG Chemie in Germany or the responsible regional association / authority 

for applications in hazardous areas.

• 

These operating instructions do not replace the company’s own standard 

operating procedures (SOPs).

• 

Wear appropriate protective clothing when handling chemical substances.

• 

Do not use the dip tubes after the maximum period of use has expired, or else 

serious injury may occur. The duration of use depends on the chemicals used.

• 

Before using the products, check the materials for their chemical resistance.

2.4  General safety instructions

• 

Always observe the safety data sheets (SDS) of the chemicals used.

• 

Only use cleaned products. The products described in these operating 

instructions have been cleaned in an ultrasonic bath at the factory.

• 

Only use products for which the chemical resistance of the components is 

guaranteed.

Содержание QC M2 Series




























Отзывы: