AS MOTOR AS 460 Clip A, Руководство оператора

Страница: 16 / 32

16
Turning
Turn the device round only where the grass
has been mowed already.
Turning round on an even surface:
1. Switch off the drive.
2. Turn the device to the desired side.
3. Switch the drive back on.
Turning round on a sloping area:
1. Keep the drive switched on.
2. Turn the device upslope.
3. Hold back the handlebar and the inner
wheel.
The drive prevents sliding and supports the
turn manoeuvre.
Switching off and parking
Caution!
On a slope, the device can roll
away.
Put the device on even ground only
or secure it against rolling away.
1. Release the drive bar.
2. Release the engine brake bar.
3. Wait for the engine to stop completely be-
fore you step away from the device.
4. Pull off the plug connector.
Transport
Switch off the engine and wait until the blade
stops before you lift the device. The device
may only be lifted by two people.
Prior to each transport, let the device cool
down for at least 20 minutes.
For transport, fold down the handlebar again.
During transport on vehicles, secure the device
against rolling, sliding, tilting, and fuel leakage.
Use straps to secure the device.
Folding the handlebar
1
2
3
1. Twist the starter rope out of the guide.
2. At the left and right bar, unscrew the
knob ( 1 ).
3. Pull out the screws and the discs.
4. Pull the bar ( 2 ) at left and right outward un-
til the bolt ( 3 ) no longer secures it.
5. Flip the handlebar forward.
6. Reapply the screws, discs and knobs and
loosely tighten them so that you do not lose
them.
Beware: When folding the handlebar, do not
squeeze the Bowden cables.