Arzum OKKA OK001-WFU, Инструкция по эксплуатации, Страница: 2 / 32

2 ARZUM OKKA
Safety instructions
This appliance can be used by chil-
dren aged from 8 years and above if
they have been given supervision or
instruction concerning use of the ap-
pliance in a safe way and if they un-
derstand the hazards involved. Clean-
ing and user maintenance shall not be
made by children unless they are older
than 8 and supervised.
Keep the appliance and its cord out
of reach of children aged less than 8
years.
Appliances can be used by persons
with reduced physical, sensory or
mental capabilities or lack of expe-
rience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved.
Children shall not play with the appli-
ance.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
This appliance should only be connected to
an earthed socket installed in accordance
with the regulations. Make sure that the
supply voltage corresponds with the voltage
marked on the rating label.
In order to avoid hazards, repairs to this
electrical appliance must be carried out by
our customer service. After sales services
are provided by the authorized Arzum OKKA
dealer in your country, please contact Arzum
OKKA Turkey After Sales Department via tele-
phone.
To avoid the risk of electric shock, do not
clean the appliance with water and do not
immerse it in water.
Allow the appliance to cool down completely
before cleaning. For detailed information on
cleaning the appliance, please refer to the
section, Self-cleaning.
Do not use the appliance outdoors. Protect
it from zero or sub-zero temperatures at all
times.
For details on how to clean the surface in
contact with food, please refer to self-clean-
ing section.
Caution: The brewing chamber head and the
coffee serving nozzle become hot during use
and there is a danger of scalding from escap-
ing steam.
Caution: The heating element surface is sub-
ject to residual heat after use.