15
ARZUM
Cutting With Chopper
•
Using the chopper accessory with a capacity of 1500 ml. of your
Arzum Megablend Plus Hand Blender Set you can cut any foods easily
and practically.
•
Locate the cutting blades of your appliance onto the shaft in the
middle part of the case.
•
Place the foods to be cut inside of the case,
ensuring that the foods will be of the equivalent
level and without piling up.
•
Put the cutter adapter of your device onto the
case, ensuring to insert in the slot located on the
claws in the adapter.
•
Place the motor body of your hand blender in
its slot located on the adapter, without tightening
too much.
•
Start the process by depressing the operation button located on the
main body.
•
Once you have finished your work, rinse the bowl and double-sided
stainless steel blade with water and detergent, and store the blade in
the bowl.
•
NEVER immerse the cutter adapter in water. Wipe the outside with a
damp cloth.
WARNING
1-
NEVER
operate your
Arzum Megablend Hand Blender Set
unless
the main body is attached to the cutter adapter.
2-Do not lift the main body from its slot unless the motor fully stops.
3- Store the cutting blades in the bowl, since they are very sharp.
EN