14
ARZUM
15
ARZUM
NOTE
The Electrical Cooker should be preheated for approximately five
minutes. When the control lamp goes off, the cooker is ready for
operation.
• This light will be on until the adjusted temperature range is reached.
When the desired temperature is reached the pilot light will go off and
during cooking it will be on and off since the cooking temperature is
maintained by the thermostat.
• You can make grills and meals not
containing much water and without oils.
• When you have finished cooking / grilling
processes disconnect the power cord from
wall socket and allow it to cool down before
cleaning.
• Avoid operating at higher temperatures
since any food that has burned on the non-
stick surface may result in discoloration of
the surface.
• Such a discoloration will change the
appearance only, but not the cooking
performance of your cooker.
• You can control the steam occurring inside
of your electrical cooker, owing to a steam
outlet channel located on the lid.
NOTE
1: Use your electrical cooker with its thermostat controller attached.
2: Ensure that the supply cord is properly away from the cooking
surface when in use.
• The cooking time depends on the type and quantity of food that is to
be cooked as well as the degree of cooking, please base these times on
your own experience
USING THERMOSTAT CONTROLLER
• Thermostat controller is a precision-adjustment device, so avoid
dropping it down, striking, or stroke.
• Do not use a thermostat controller belonging to any other appliances.
• Make sure to place the thermostat
controller in its place properly. While placing
or removing, always grasp the controller, but
never pull by the power cord.
• Thermostat indicator stops at the positions
of “OFF” and “5”. Do not turn it beyond these
limits.
• Do not use a damaged or overheated
thermostat controller, and take it to a nearest
Arzum Authorized Service
for repair.
• Before mounting / removing the controller
make sure that the temperature setting is at
the position “OFF”, otherwise it may result in
damage or overheating.
CLEANING CARE
• Before cleaning and care, turn the temperature switch to “OFF” and
unplug the appliance from the wall socket and allow it to cool down.
• Do not remove the thermostat from the device until has cooled down,
as the temperature sensor is still very hot after use.
• After each use, wipe off your electrical
cooker covered with non-stick coating.
• Under no circumstances should device
and thermostat controller be immersed in
water for cleaning.
• You can remove the remaining foods
and wipe the cooking surface plates with a
slightly damp cloth or paper serviette, when
the surface is still warm.
EN
