Arzum CLARO AR 688, Инструкция по эксплуатации

Страница: 17 / 24

17 ARZUM
• Set the variable steam button to the position of no steam, i.e. “0”. This
will prevent the steam flow; even there is water in the water tank.
• Adjust the temperature switch according to the kind of fabrics you
want to iron.
• You can start ironing after the temperature display light disappears,
indicating that the selected temperature is being maintained.
NOTE: Pilot light may again turn on to maintain the selected
temperature of soleplate during ironing, which is suitable for the article
being ironed.
FILLING WITH WATER
(For steam ironing and spraying)
• Remove the mains plug from the wall socket before filling your iron, set
the variable steam button the position of dry, i.e. “0”.
• Open the water filling inletcover, with the iron held on an angle, pour
water slowly into the filling hole. Do not fill higher than indication “MAX”
of the water tank. After filling the tank then close the water filling inlet
cover.
• You can use tap water, unless it is very hard (hardness higher than
17º PH). Otherwise, it is advisable to use distilled water. However, the distilled
water must be subjected to an actual distillation process before filling.
EN