Arzum BEYMEN Club AR 3048-DSB, Инструкция по эксплуатации

Страница: 15 / 32

15 ARZUM
• With the ON/OFF switch turned on “I”, the lid of
the kettle MUST be closed.
• Turn the main switch (on/off switch) to
the position “I“. Indicator light will turn on and
the water will begin to get warm. When the
water reaches boiling the kettle will switch off
automatically and the main switch will spring
back to the original position.
• If you desire to stop the boiling function you
can turn the main switch (on/off switch) to the position “0”.
• When filling the kettle with water,
ALWAYS remove the appliance from its
power base unit. By doing so, you can prevent the water from pouring on
the table.
• Do not fill with less than 0.5 liter of water (less
than “MIN” indication) or more than 1,8 liter of
water (more than “MAX” indication).
If you attempt to boil a quantity of water below
the minimum level or above the maximum level,
the appliance may switch off rather early or
the boiling water may eject from the spout,
respectively.
• When not in use, provided that the main
switch is turned off “O”, it would be convenient to allow the appliance to stay
continuously plugged in the kitchen.
SWITCHING ON AGAIN
• If you want to re-boil the water make sure that your appliance has
cooled down sufficiently. Should the on/off switch turn to the position “0”
automatically, do not force it to the position “I”. Otherwise, you may damage
to your appliance.
SECURITY SYSTEM
• After the water has boiled, the appliance
switches off
automatically off.
• Protection against operation without water: If
your device accidentally
is put into operation, then the fuse turns against
EN