14
15
• Turn the water tank and put it back onto the base.
Water will start running into the water basin right away.
Wait a few minutes (until the air bubble has finished)
until the basin has filled with water.
• By using the mist amount adjusting button, you
are
able to adjust humidity density efectually. Make sure not
to divert mist output directly to the walls, furnitures, and
this kind of surfaces.
• Let your humidifier operate until the room has the
required humidity level. For turning off your device, get
the position of mist amount adjusting button to “min”
and turn it until you hear “click”.
• Your appliance is on working, indicator light will be
green, when the water is finished, indicator ligt turn to red.
• Unplug your device.
NOTE: ALWAYS unplug your appliance before removing the water tank or your
appliance is not in
use.
• Do not use your humidifer which remaining the water in the water tank more
than 2 days.
• Fill the water tank with fresh water before every usage.
• Never fill water from the mist outlet nozzle
• Mist outlet nozzle must be far from electrical devices at least 2 meters distance.
• Plug your device. Turn the mist amount adjusting button from “min” position to
“max” position. Power lights up to show that the operation of your device.
A.Closed
B. Minimum mist volume
C. Maximum mist
volume
WARNING: NEVER OPERATE YOUR APPLIANCE WITHOUT WATER.
• We suggest that empty the water tank if you are not going to use your humidifier
for two or more days, this prevents algae and bacteria growth.
• For emptying the water tank, remove it from the base. Turn the lid of the water
tank and open it, then empty the tank.
• Blow off carefully the remaining water in water tank and wipe dry the area with a
soft cloth.
CLEANING AND CARE
• Always disconnect it from the outlet before cleaning and care your appliance.
• Regular cleaning will reduce scale build-up.
•
NEVER
immerse the base, main cord and plug in water or any other liquid.
• Do not use cleaning or scouring agents, scouring pads, abrasive or solvents for
cleaning.
• Empty the removal water from the water basin and
then clean it with a damp cloth. Clean the water-level
sensor regularly, simple wipe clean with a soft cloth,
prevent to cause malfunction.
• It is important that
cleaning the transducer,
water tank and lid, water
basin and air filter once a
week.
• Clean the water tank and its lid with lukewarm water.
Clean the inside of the water tank by filling it with
water, firmly tightening the tank lid and shaking the tank
repeatedly. Wipe the base and outside of your appliance with a damp cloth.
• If you are not going to use your humidifier for more days, clean all parts, empty
water basin and water tank, after dry all parts and accessories then you can store
your appliance.
Calcification Removal
• Set the on/off button to off position and disconnect the humidifier from the
mains.
• Fill the water basin with water and white vinegar. Leave the water and vinegar for
at least 4 hours preferably overnight.